SHM-4-2000螺桿式冷水機組彈簧減震器
Screw type cold water chiller spring damper
上海淞江減震器集團有限公�官方�(wǎng)站為您介紹:SHM-4-2000螺桿式冷水機組彈簧減震器信息,淞江集團為云機房空�(diào)系統螺桿式冷水機組推薦一款專用的彈簧減震�,該款減震器可以有效的將冷水機組的震動吸�85%以上,效果非常明��
Shanghai Songjiang absorber group limited official website for your information: spring shock absorber SHM-4-2000 screw chillers, Songjiang group for the air conditioning system cloud room screw chillers recommend a special spring damper, the damper can effectively use cold water unit vibration absorption of , the effect is very obviously.
螺桿式冷水機組彈簧減震器簡介�
1、彈簧采用低頻率值設�,并�(jīng)噴塑處理,耐候性強,防震效果好�
2、頂�、底部均采用防滑耐磨橡膠以及固定螺栓,安全性能大大提高�
3、安裝簡單并根據實際需要調整水平及高度�
4、能夠有效隔離冷水機�、冷卻塔、熱泵機�、發電機�、等大型動力�(shè)備的振動,并保護及延長其使用壽命�
Product introduction:
1, the spring is designed with low frequency, and the weather resistance is good and the shock resistance is good.
2, the top and bottom are all used for anti-skid and wear-resistant rubber and fixed bolts, and the safety performance is greatly improved.
3. The installation is simple and the level and height are adjusted according to the actual needs.
4, it can effectively isolate the vibration of cold water chiller, cooling tower, heat pump unit, generator set, and other large power equipment, and protect and prolong its.
螺桿式冷水機組彈簧減震器�(zhì)保說明:
淞江集團所有彈簧減震器�(chǎn)品全部質�10年(限室�(nèi)使用�,本廠所有彈簧減震器彈簧采用汽車彈簧鋼,并非工業彈簧鋼可�,我們希望在您更換設備前無需更換或維修彈簧減震器�
Quality assurance:
All the spring shock absorber products of Songjiang group are all guaranteed for 10 years. All spring shock absorber springs of our factory are made of automobile spring steel instead of industrial spring steel. We hope that there will be no need to replace or repair spring shock absorbers before you change the equipment.
螺桿式冷水機組彈簧減震器介紹�
水冷螺桿式冷水機組也是冷水機組的一�,由于它的主要構成部件使用了螺桿式壓縮機,所以名稱可稱為水冷螺桿式冷水機�。它的冷凍出水溫度范圍為3℃~20�,可廣泛�(yīng)用于塑膠,電�,電�,化�,制�,印刷,食品加工等各種工�(yè)冷凍制程需使用冷凍水的�(lǐng)�,或大型商場,酒店,工廠,醫院等各種中央空調工程中需使用冷凍水集中供冷的�(lǐng)域�
機組制冷�,壓縮機將蒸�(fā)器內低溫低壓制冷劑吸入氣缸,�(jīng)過壓縮機做功,制冷劑蒸氣被壓縮成為高溫高壓氣�� �(jīng)排氣管道進入冷凝器內。高溫高壓的制冷劑氣體在冷凝器內與冷卻水進行熱交�,把熱量傳遞給冷卻水帶走,而制冷劑氣體則凝�(jié)為高壓液�。從冷凝器出來的高壓液體�(jīng)熱力膨脹閥節流降壓后進入蒸發�。在蒸發器內,低壓液體制冷劑吸收冷凍水的熱量而汽�,使冷凍水降溫冷�,成為所需要的低溫用水。汽化后的制冷劑氣體重新被壓縮機吸入進行壓縮,排入冷凝器,這樣周而復�,不斷循�(huán),從而實�(xiàn)對冷凍水的冷��
從機組出來的冷凍�,進入室內的風機盤�、變風量空氣�(diào)節機等末端裝置,在室內與對流空氣發生熱交換,在此過程中,水由于吸收室內空氣的熱量(向室�(nèi)空氣散熱)而溫度上�,而室�(nèi)空氣�(jīng)過室�(nèi)換熱器后溫度下降,在風機的帶動下,送入室內,從而降低室�(nèi)的空氣溫�,而溫度上升后的冷凍水在水泵的作用下重新進入機組,如此循�(huán),從而達到連續制冷的目��
ZTF type spring shock absorber installation instructions related links