SHM锟酵匡拷锟絳(di锟斤拷o)锟斤拷锟结彈锟缴減锟斤拷锟斤拷锟斤拷锟絙锟絝锟斤拷
SHM spring isolator installation guide

锟斤拷锟絙前锟斤拷請锟絖锟絁(r锟斤拷n)锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟斤拷號規(gu锟斤拷)锟斤拷锟角凤拷锟斤拷锟絖锟斤拷
Before installation, make sure the model and the specification are?correct.
锟斤拷锟絙锟絝锟斤拷
Installation guide
锟斤拷锟借工锟竭ｏ拷锟斤拷锟狡口忥拷19mm (M12)锟斤拷24mm (M16)锟斤拷32mm (M22) 锟絖锟节帮拷锟斤拷锟斤拷爪式千锟斤拷.锟斤拷
Required tools: 19mm (M12), 24mm (M16) and 32mm (M22) open wrenches and claw jack.
锟斤拷未锟斤拷蓽p锟斤拷锟斤拷锟竭讹拷锟絳(di锟斤拷o)锟斤拷前锟斤拷請锟斤拷锟斤拷锟絧锟斤拷锟斤拷锟侥夛拷锟絴取锟斤拷锟斤拷
Before completing the adjustment of the isolator, do not remove the pressure pad from the isolator.
請锟饺革拷锟斤拷(j锟斤拷)锟斤拷锟紸(ch锟斤拷)锟斤拷栓锟教讹拷锟阶碉拷位锟斤拷锟斤拷锟絚锟斤拷锟絙位锟斤拷锟紸(y锟斤拷)锟斤拷锟斤拷A(ch锟斤拷)锟斤拷栓锟斤拷
Embed foundation bolt according to the location of bolt-loaded holes.
锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟脚碉拷锟斤拷锟絙位锟矫猴拷锟斤拷锟饺岋拷锟斤拷位锟斤拷锟斤拷玫锟�锟斤拷( 锟斤拷D1 )
Remove quilting rivet after installing the isolator (Fig 1) .
锟斤拷M12锟教讹拷锟斤拷栓锟斤拷锟絧锟斤拷锟斤拷锟絚锟絆(sh锟斤拷)锟斤拷潭锟�锟斤拷锟斤拷锟斤拷锟絠锟給锟斤拷( 锟斤拷D2 )
Fasten the isolator and the equipment with M12 fixed bolt without locking it (Fig 2).
锟斤拷锟絧锟斤拷锟斤拷锟斤拷锟矫伙拷锟紸(ch锟斤拷)锟斤拷栓锟教讹拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟終锟斤拷锟絉锟絩木锟絖锟教讹拷锟竭度★拷
Fasten the isolator with foundation bolt on the ground and fix the height with wooden panel.

B值锟斤拷0锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷W/2
锟较度可讹拷锟斤拷40mm锟斤拷50mm锟斤拷75mm锟斤拷100mm锟斤拷125mm锟斤拷150mm

锟絳(di锟斤拷o)锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟竭度時锟斤拷锟缴碉拷锟竭咃拷姆锟斤拷锟斤拷锟矫�5~10mm 锟斤拷锟終锟斤拷锟斤拷锟絠锟給锟斤拷( 锟斤拷D3 )
Loosen the nuts on both sides for 5~10mm first before adjusting?height of the isolator and lock them afterwards (Fig 3).
使锟矫癸拷锟狡口忥拷32mm 锟絖锟节帮拷锟斤拷锟斤拷锟斤拷r針凤拷锟斤拷锟絳(di锟斤拷o)锟斤拷M22锟斤拷栓锟斤拷使锟斤拷锟斤拷锟斤拷锟斤拷锟铰夛拷锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟絯锟紽锟斤拷锟斤拷锟斤拷(锟斤拷D4 )
Adjust M22 adjustment bolt in the anti-clockwise direction with 32mm open wrench to press down?the spring and to raise the iron sheet (Fig 4).
锟絳(di锟斤拷o)锟斤拷*锟斤拷锟絴锟斤拷取锟斤拷锟絩锟斤拷锟斤拷锟斤拷停止锟絳(di锟斤拷o)锟斤拷锟斤拷取锟斤拷木锟絖锟斤拷( 锟斤拷D5 )
Adjustment can be stopped and wooden panel can be removed once you can take out the pressure?pad (Fig 5).
锟斤拷锟絚锟絆(sh锟斤拷)锟斤拷潭锟街甅12锟斤拷栓锟斤拷全锟絠锟給锟斤拷锟斤拷锟斤拷砂锟斤拷b锟絳(di锟斤拷o)锟斤拷锟斤拷( 锟斤拷D6 )
After the adjustment, lock the isolator with M12 fixed bolt (Fig 6).
锟斤拷锟絙锟斤拷請锟絲锟介彈锟斤拷之锟铰夛拷锟斤拷锟斤拷锟界彈锟缴夛拷锟斤拷锟斤拷示锟斤拷锟截诧拷锟斤拷]锟叫憋拷锟斤拷效锟斤拷锟斤拷锟斤拷(y锟斤拷ng)锟斤拷锟斤拷Q锟絕锟斤拷锟斤拷锟街�規(gu锟斤拷)锟斤拷锟斤拷锟斤拷請聯(li锟斤拷n)系锟斤拷锟斤拷司锟剿員锟斤拷
After the adjustment, check the press amount of the spring. If it appears with insufficient loading,pleaereplace with bigger loading by contacting our staff.
锟斤拷锟絙锟絩锟斤拷請注锟解安全锟斤拷
Be cautious during the installation.

锟斤拷锟紹(y锟斤拷ng)锟絚锟絲锟侥匡拷锟矫匡拷锟斤拷^锟斤拷潭锟斤拷锟剿�锟絚锟斤拷锟紸(ch锟斤拷)锟斤拷栓锟斤拷锟斤拷锟絠锟給锟斤拷锟斤拷锟街憋拷锟斤拷锟斤拷锟斤拷锟絙锟斤拷B(t锟斤拷i)&锟斤拷锟斤拷锟铰夛拷锟较讹拷锟斤拷锟斤拷锟斤拷
Maintenance checking points: Check the mounting bolts, remain fixed bolt locked, installation of the isolator, and the deflection of the spring.

锟紻1) 锟斤拷锟斤拷位锟斤拷锟斤拷取锟斤拷锟斤拷锟終锟斤拷木锟絖锟教讹拷锟竭讹拷锟斤拷
Fig 1) Remove quilting rivet and fix the?height with wooden panel.

锟紻2) 锟斤拷M12锟斤拷栓锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟絚锟絆(sh锟斤拷)锟斤拷潭锟斤拷锟斤拷锟斤拷锟斤拷i锟給锟斤拷同锟絩锟皆伙拷锟紸(ch锟斤拷)锟斤拷栓锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟教讹拷锟斤拷
Fig 2) Fasten the isolator and the Equipment?with M12 fixed bolt without locking it. Fasten?the isolator with foundation bolt.

锟紻3) 锟絳(di锟斤拷o)锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟絕锟饺時锟斤拷锟斤拷锟缴碉拷锟竭呏�锟斤拷锟斤拷锟斤拷帽5~10mm 锟斤拷锟斤拷锟斤拷锟斤拷锟絠锟給锟斤拷
Fig 3) Loosen the nuts on both sides for?5~10mm first before adjusting height of?the isolator and lock them afterwards.

锟紻4) 使锟矫癸拷锟斤拷锟絖锟节帮拷锟斤拷锟斤拷锟斤拷r針凤拷锟斤拷锟絳(di锟斤拷o)锟斤拷锟斤拷栓锟斤拷使锟斤拷锟斤拷锟铰夛拷锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟絯锟紽锟斤拷锟斤拷锟斤拷
Fig 4) Adjust the bolt in the anticlockwise?direction with open wrench to press?down the spring and to raise the iron sheet.

锟紻5) 锟絳(di锟斤拷o)锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟絯锟紽锟斤拷锟斤拷锟斤拷锟斤拷锟絴锟斤拷锟斤拷取锟斤拷锟絩锟斤拷锟斤拷锟斤拷锟斤拷{(di锟斤拷o)锟斤拷锟斤拷取锟斤拷木锟絖锟斤拷
Fig 5) Adjust until the iron sheet of the?isolator arises. Adjustment can be stopped?and wooden panel can be removed once?you can take out the pressure pad.

锟紻6) 锟斤拷锟斤拷栓锟絚锟絆(sh锟斤拷)锟斤拷锟斤拷全锟絠锟給锟斤拷锟斤拷锟斤拷锟斤拷蓮锟斤拷蓽p锟斤拷锟斤拷锟斤拷锟絙锟絳(di锟斤拷o)锟斤拷锟斤拷
Fig 6) After the adjustment, lock the isolator?with M12 fixed bolt 5-10mm

锟絚锟斤拷锟斤拷锟絛锟斤拷