HTA锟斤拷锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟絙锟絝锟斤拷
HTA Hanging type Spring shock absorber Installation instructions

锟斤拷锟絙前锟斤拷請锟絖锟絁锟斤拷锟斤拷锟斤拷锟紽锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟斤拷號锟斤拷規(gu锟斤拷)锟斤拷锟角凤拷锟斤拷锟絖锟斤拷
Before installation,make sure the model and the specification are correct.
锟斤拷锟絙锟絝锟斤拷
Installation guide
锟斤拷锟借工锟竭ｏ拷锟斤拷锟狡口忥拷17mm锟斤拷M10锟斤拷锟斤拷19mm锟斤拷M12锟斤拷锟斤拷24mm锟斤拷M16锟斤拷锟絖锟节帮拷锟斤拷锟斤拷
Required tools锟斤拷17mm锟斤拷M10锟斤拷锟斤拷19mm锟斤拷M12锟斤拷锟斤拷24mm锟斤拷M16锟斤拷open wrenches.
锟斤拷锟絚锟斤拷锟絙位锟斤拷處锟斤拷锟斤拷(j锟斤拷)施锟斤拷規(gu锟斤拷)锟斤拷锟紸(y锟斤拷)锟斤拷锟斤拷虾锟斤拷锟揭�锟斤拷幕锟斤拷A(ch锟斤拷)锟斤拷栓锟斤拷锟斤拷锟斤拷D1锟斤拷
Embed required foundation bolts according to the loading on the installation location.(Fig 1)

锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟結(ji锟斤拷)锟斤拷(g锟斤拷u)锟紻锟斤拷
Hanging type shock absorber?structure drawing锟斤拷

锟斤拷锟轿尺达拷锟斤拷锟�
Outline dimension table:

锟斤拷锟絙锟絝锟斤拷
Installation guide
锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟絙锟斤拷锟紸(y锟斤拷)锟斤拷锟斤拷锟絙位锟矫碉拷锟斤拷栓锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷栓锟絠锟給锟斤拷锟斤拷锟斤拷D2锟斤拷
Fit spring dampers on the bolts at the reserved mounting position and lock the bolts.(Fig 2)
锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟絚锟絆(sh锟斤拷)锟斤拷锟紹锟接的絲锟斤拷锟絣锟絙锟较★拷锟斤拷锟斤拷D3锟斤拷
Fit the spring shock absorber with the wire bar attached to the device.(Fig 3)
使锟斤拷锟斤拷锟铰冿拷锟絯锟斤拷帽锟斤拷锟絙锟絚锟絆(sh锟斤拷)锟斤拷锟紹锟接的固讹拷處锟斤拷锟皆憋拷锟絳(di锟斤拷o)锟斤拷锟斤拷锟剿時锟较诧拷锟斤拷帽锟斤拷锟斤拷要锟絠锟給锟斤拷锟斤拷锟斤拷D4锟斤拷
Use the upper and lower two nuts to install the attachment to the device so that the upper nut does not need to be locked.(Fig 4)
锟斤拷锟絆(sh锟斤拷)锟戒安锟絙锟斤拷锟斤拷馨锟斤拷b锟斤拷锟�锟斤拷
Complete the equipeent and piping engineering installation.
使锟斤拷锟絖锟节帮拷锟斤拷锟絳(di锟斤拷o)锟斤拷锟铰诧拷锟斤拷帽锟斤拷锟絳(di锟斤拷o)锟斤拷锟絆(sh锟斤拷)锟斤拷水平锟斤拷锟斤拷锟缴夛拷锟絪锟斤拷锟斤拷锟斤拷锟斤拷D5锟斤拷
Apply the open wrench to adjust lower nuts for the balance of the eqipment and the press amount for the spring.(Fig 5)
锟絳(di锟斤拷o)锟斤拷锟斤拷珊锟斤拷锟斤拷聝锟斤拷w锟斤拷帽锟斤拷锟斤拷锟絠锟給锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷FHTA锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟侥帮拷锟絙锟絳(di锟斤拷o)锟斤拷锟斤拷锟斤拷锟斤拷D6锟斤拷
Lock the upper and lower nuts after adjusting.(Fig 6)

锟斤拷锟絙锟斤拷請锟絲锟介彈锟斤拷锟铰夛拷锟斤拷锟斤拷锟界彈锟缴夛拷锟斤拷锟斤拷锟斤拷锟絫锟斤拷示锟斤拷锟截诧拷锟姐，锟絔锟叫減锟斤拷效锟斤拷锟斤拷锟斤拷(y锟斤拷ng)該锟斤拷锟絈锟絕锟斤拷锟斤拷氐膹锟斤拷蓽p锟斤拷锟斤拷锟斤拷號锟斤拷锟斤拷請锟节憋拷锟斤拷司锟絀(y锟斤拷)锟斤拷(w锟斤拷)锟剿員聯(li锟斤拷n)系锟斤拷
After the adjustment,check the press amount of the spring.If it appears with insufficient loading,please replace with bigger loading by contacting our staff.
锟斤拷锟絙锟絩 請注锟解安全锟斤拷
Be cautious during the installation.
锟斤拷锟紹(y锟斤拷ng)锟街�锟斤拷每锟斤拷要锟絕锟斤拷潭锟斤拷锟剿�锟角凤拷锟斤拷锟缴勶拷锟斤拷锟斤拷锟街忥拷锟缴減锟斤拷锟斤拷锟斤拷锟絙锟絩锟斤拷锟斤拷锟铰夛拷锟较讹拷锟角凤拷锟斤拷锟斤拷锟斤拷
Maintenance checking points:remain M12 fixed bolt locked,balance of the base,installation of the isolator,and the deflection of the spring.

锟紻1锟斤拷锟斤拷锟絙前锟斤拷請锟絖锟絁锟斤拷锟斤拷锟斤拷锟紽锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟斤拷锟斤拷號锟斤拷規(gu锟斤拷)锟斤拷锟角凤拷锟斤拷锟絖锟斤拷
Fig 1锟斤拷Before installation,make sure the model and the specification are correct.

锟紻2锟斤拷锟斤拷锟斤拷锟缴減锟斤拷锟斤拷锟絙锟斤拷锟紸(y锟斤拷)锟斤拷锟斤拷锟絙位锟矫碉拷锟斤拷栓锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷栓锟絠锟給锟斤拷
Fig 2锟斤拷Fit spring dampers on the bolts at the reserved mounting position and lock the bolts.

锟紻3锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟紽锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟絚锟絆(sh锟斤拷)锟斤拷锟紹锟接的絲锟斤拷锟絣锟絙锟斤拷锟斤拷
Fig 3锟斤拷Fit the spring shock absorber with the wire bar attached to the device.

锟紻4锟斤拷使锟斤拷锟斤拷锟铰冿拷锟絯锟斤拷帽锟斤拷锟絙锟絚锟絆(sh锟斤拷)锟斤拷锟紹锟接的固讹拷處锟斤拷锟皆憋拷锟絳(di锟斤拷o)锟斤拷锟斤拷锟剿時锟较诧拷锟斤拷帽锟斤拷锟斤拷要锟絠锟給锟斤拷
Fig 4锟斤拷Use the upper and lower two nuts to install the attachment to the device so that the upper nut does not need to be locked.

锟紻5锟斤拷使锟斤拷锟絖锟节帮拷锟斤拷锟絳(di锟斤拷o)锟斤拷锟铰诧拷锟斤拷帽锟斤拷锟絳(di锟斤拷o)锟斤拷锟絆(sh锟斤拷)锟斤拷水平锟斤拷锟斤拷锟缴夛拷锟絪锟斤拷锟斤拷
Fig 5锟斤拷Apply the open wrench to adjust lower nuts for the balance of the eqipment and the press amount for the spring.

锟紻6锟斤拷锟絳(di锟斤拷o)锟斤拷锟斤拷珊锟斤拷锟斤拷聝锟斤拷w锟斤拷帽锟斤拷锟斤拷锟絠锟給锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷锟斤拷FHTA锟斤拷式锟斤拷锟缴減锟斤拷锟斤拷锟侥帮拷锟絙锟絳(di锟斤拷o)锟斤拷锟斤拷
Fig 6锟斤拷Lock the upper and lower nuts after adjusting.

锟絚锟斤拷锟斤拷锟絛锟斤拷